Blog - The Stress Point

Insights from EDT experts, so you're equipped to tackle the next engineering challenge.

In-Depth Engineering Analysis

Check out the digital version of the StressPoint Magazine.

Read the Latest Issue

Filter by engineer or date

Recent Blog Posts

Why Utilize a Drone?

EDT

A drone allows one to work smarter while reducing inspection time and potential risks from hazards found at the site. Utilizing drones can prevent accidents in potentially dangerous environments and can be deployed to examine hard-to-reach locations.

The Impact of 5G to Commercial Structures

Recent advancements in technology and upgrades to the telecommunications infrastructure have made the promising 5G network a reality. These advancements have had a significant impact to the already impressive capabilities afforded by modern smartphones and at the same time they have also had an...

Spring Showers Bring … A Wet Basement

Cody E. Tarbell, P.E.

Cody E. Tarbell, P.E.

For homeowners in many areas, spring showers don’t just bring green grass and beautiful flowers, but also a wet basement. When water enters a basement, soaked carpets, wet wall coverings, and waterlogged baseball card collections stored in the basement are a common occurrence.

Transformer Failure: Frequency and Causes

Transformers are among the most reliable and robust elements in the electric utility system. A transformer is basically two sets of wires (the windings) wrapped around a steel or iron core (see schematic in Figure 1). The windings and the core are immersed in oil and enclosed in a steel tank...

Black Liquor Recovery Boiler 

In a prior blog post I introduced you to the basic steps involved in the manufacture of paper, from trees to paper using the Kraft Paper Process. In this blog we will review an integral component in the Kraft Paper Process known as the Black Liquor Recovery Boiler. To refresh your memory, the Kraft...

Combustion Basics and Pitfalls

Combustion is a subject that can be intimidating. The form of combustion that most people are familiar with is burning wood or paper. Believe it or not, most combustion processes are much simpler than those. We’ll get to that later. With most combustion processes, a fuel reacts with an oxidant. Take...

Gearhead Quandary: Be Flat or Be Crossed?

Most, if not all, of us know that deep rumbling sound of a V8-powered muscle car or even your garden variety V8-powered daily driver. There is almost something primal about the deep throaty sound of a V8. In modern times V8 engines are becoming more and more of a rare breed, with turbo-charged four...